PA Hot Melt Adhesive Film
PA is short for Polyamide. PA hot melt adhesive film is made of Polyamide. Polyamide is also called Nylon, which is widely used in textile industry. Because of the thermoplasticity of the Polyamide, it also can be made into hot melt adhesive film.
Advantages of PA Hot Melt Adhesive Film
- Excellent bonding properties
- High temperature resistance
- Dry cleaning resistance
- Chemical solvent resistance
- PA Hot Melt Adhesive Film Description
- Physical and Chemical Properties
- Processing and Storage
Product： TA120
Thickness：0.05mm-0.25mm(Other thicknesses can be customized)
Width: 100cm,(other width can be customized)
Base paper: Glassine single silicon release paper.
Applications: Fabric, non-woven fabric, embroidered badges, trademarks, and other types of textile bonding.
Performance: Dry cleaning resistance and washing resistance, high-grade clothing adhesive.
Appearance: Colorless transparent film
Solubility: Insoluble in water
Melting index: 55±10g/10min(160℃×2.16kg)
Melting range: 100-120 ℃
Steam pressure: Not present
Weight: 9.97±0.3g/㎡/0.01mm
Processing: Avoid scalding when using at high temperatures.
Storage: Store at room temperature (10-30℃/40%-60%RH), keep in a cool and ventilated place, pay attention to moisture.
How to Use PA Hot Melt Adhesive Film
Commonly, PA hot melt adhesive film is made into films with release paper. After hot pressing, the under paper should be peeled away. Then, bonding with another material by hot pressing again. The operating temperature of PA hot melt adhesive film is rage from 140℃ to 160℃.
Applications of PA Hot Melt Adhesive Film
PA hot melt adhesive film can be used in bonding leather, textile, plastic, metal, etc. Due to the poor low temperature resistance of PA, flexibility is usually not available under a very low temperature. If you have bonding requirements about the above materials, you can contact us immediately.
